Epever SolarV TRIRON Series User Manual page 29

2 Battery capacity
Operation:
Step 1: On the initial interface, press the
press the button to enter the battery parameters setting interface.
Step 2: Long-press the
Step 3: Press the
Step 4: Press the
Step 5: Press the
3 Temperature unit
Operation:
Step 1: On the initial interface, press the
press the button to enter the battery parameters setting interface.
Step 2: Long-press the
Step 3: Press the
Step 4: Press the
Step 5: Press the
4 LCD cycle time
NOTE: The LCD cycle default time is 2s, and the setting time range is 0 20s.
Copyright© 2022 SolarV GmbH All rights reserved.
button to enter the battery-type interface.
button for the battery capacity interface.
or button to set the battery capacity.
button to confirm.
button to enter the battery-type interface.
button twice for the temperature unit interface.
or button to set the temperature units.
button to confirm.
button to browse the battery parameters. Then,
button to browse the battery parameters. Then,
25