Epever SolarV TRIRON Series User Manual page 17

Step 5 Powered on the controller
Connect the battery's fast-acting fuse to power the controller. Then check the battery indicator's
status (the controller operates normally when the indicator is lit in green). Connect the fast-acting
fuse and circuit breaker of the load and PV array. Then the system will work in preprogrammed
mode.
If the controller is not operating properly or the battery indicator on the controller
shows an abnormality, please refer to 4.2 "Troubleshooting."
CAUTION
Copyright© 2022 SolarV GmbH All rights reserved.
13