Step Down Converter; Barrel Connector (2.1 Mm) - Will Burt POSITIONIT PI-150 Operator's Manual

I PI-150 PI-75
P OSITION T AND

1.6.6 Step Down Converter

The step down converter (P/N: 208017) (Figure 1-8) is used in systems with 24 VDC input
power to step down the power to 12 VDC to power the default joystick controller if the AC power
supply supplied with the joystick is not used to provide power.
Figure 1-8 Step Down Converter

1.6.7 Barrel Connector (2.1 mm)

The 2.1 mm barrel connector (P/N: 5195601) (Figure 1-9) can be used to connect the controller
to the step down converter or 12 VDC power source.
Figure 1-9 Barrel Connector
TP-5129001-J 1-9
January 2022