MS-9156 ATX Server Board
Onboard Parallel Port
This specifies the I/O port address and IRQ of the onboard parallel port.
Settings: [378/IRQ7], [278/IRQ5], [3BC/IRQ7], [Disabled].
Parallel Port Mode
This item selects the operating mode for the parallel port: [SPP], [EPP],
[ECP], [ECP+EPP].
[SPP]: Standard Parallel Port
[EPP]: Enhanced Parallel Port
[ECP]: Extended Capability Port
[ECP + EPP]: Extended Capability Port + Enhanced Parallel Port
PWRON After PWR-Fail
This setting specifies whether your system will reboot after a power failure
or interrupts occurs. Available settings are:
[Off]
[On]
[Former-Sts] Restores the system to the status before power failure or
3-20
Leaves the computer in the power off state.
Reboots the computer.
interrupt occurs.