Table of Contents
Advertisement
MS-9156 ATX Server Board
6. The Basics
An example of a typical Adaptec Storage Manager – Browser Edition screen
is shown below.
MSI Reminds You...
Depending on your operating system, browser, and color scheme
you may notice some differences between this illustration and your
screen.
The action buttons are:
Logout—Selecting Logout ends your session and returns you to
the Login screen.
Rescan—Used to rescan the configuration of the system. Typically,
when a rescan is required, it occurs automatically, for example, after
an array is created.
However, the system configuration can change without Adaptec
Storage Manager being notified. For example, drives that are in-
serted or removed from a nonintelligent enclosure or an enclosure
powered on after you logged into Adaptec Storage Manager would
not be displayed unless you manually rescan.
The remaining buttons open additional windows that provide more de-
tailed information and allow you to perform actions or change settings on a
specific aspect of your storage subsystem.
These are:
Events
Options
Help
Properties
Tasks
Immediately following the header frame is a controller information line in-
cluding the model number of the first Adaptec RAID controller found in the
system and the amount of cache memory (if any) installed on that controller.
B-18
Advertisement
Table of Contents
