Installing Ddr Modules - MSI E7210 MasterX-FA2R User Manual

DIMM1 DIMM2
128MB~1GB
128MB~1GB
128MB~1GB 128MB~1GB
128MB~1GB
128MB~1GB
128MB~1GB 128MB~1GB

Installing DDR Modules

1. The DDR DIMM has only one notch on the center of module. The mod-
ule will only fit in the right orientation.
2. Insert the DIMM memory module vertically into the DIMM slot. Then
push it in until the golden finger on the memory module is deeply in-
serted in the socket.
MSI Reminds You...
You can barely see the golden finger if the module is properly
inserted in the socket.
3. The plastic clip at each side of the DIMM slot will automatically close.
DIMM3 DIMM4
128MB~1GB
128MB~1GB
128MB~1GB 128MB~1GB
128MB~1GB
128MB~1GB
128MB~1GB 128MB~1GB
S: Single-Channel Mode
Notch
Volt
Hardware Setup
System Density Mode
128MB~1GB S
128MB~1GB S
128MB~1GB S
128MB~1GB S
256MB~2GB S
256MB~2GB S
256MB~2GB D
256MB~2GB D
512MB~4GB D
D: Dual-Channel Mode
2-13