Table of Contents
Advertisement
MS-9156 ATX Server Board
2. Using the Disk Utilities
The Disk Utilities enable you to format or verify the media of your Serial
ATA hard disks.
To access the disk utilities:
1. Turn on your computer and press Ctrl+A when prompted to access the
ARC utility.
2. From the ARC menu, select Disk Utilities.
3. Select the desired disk and press Enter.
You are offered the following options:
Format Disk—Simulates a low-level format of the hard drive by writ-
ing zeros to the entire disk. Serial ATA drives are low-level formatted
at the factory and do not need to be low-level formatted again.
MSI Reminds You...
Formatting destroys all data on the drive. Be sure to back up your
data before performing this operation.
Verify Disk Media—Scans the media of a disk drive for defects.
B-28
Advertisement
Table of Contents
