Table of Contents
Advertisement
MS-9156 ATX Server Board
The mainboard provides connectors to connect to FDD, IDE HDD, case,
LAN, USB Ports, CPU/system power supply fans, ... and etc.
Floppy Disk Drive Connector: JFDD
The mainboard provides a standard floppy disk drive connector that
supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.
Fan Power Connectors: CPUFAN1/2, SYSTEMFAN1/2/3/4
The CPUFAN1/2 (processor fans) & SYSTEMFAN1/2/3/4 (system fan)
support system cooling fan with +12V. It supports three-pin head connector.
When connecting the wire to the connectors, always note that the red wire is
the positive and should be connected to the +12V; the black wire is Ground and
should be connected to GND. If the mainboard has a System Hardware Moni-
tor chipset on-board, you must use a specially designed fan with speed sensor
to take advantage of the CPU fan control.
MSI Reminds You...
Always consult the vendors for proper CPU cooling fans.
2-16
Connectors
JFDD
SENSOR
+12V
GND
CPUFAN1/2
SENSOR
+12V
GND
SYSTEMFAN1/2/3/4
Advertisement
Table of Contents
