Table of Contents
Advertisement
USB Keyboard/Mouse Support
Set to [Enabled] if your need to use a USB-interfaced keyboard/mouse in
the operating system that does not support or have any USB driver installed,
such as DOS and SCO Unix.
CSA LAN (Giga-LAN)
The field determines whether the onboard Giga-bit LAN controller is
activated. Setting options: [Enabled], [Disabled].
82547 LAN Boot ROM
This setting enables/disables the initialization of the onboard LAN Boot
ROM during bootup. Selecting [Disabled] will speed up the boot process.
Super IO Device
Press [Enter] to enter the following sub-menu screen.
Onboard FDC Controller
The item is used to enable or disable the onboard Floppy controller. Select
[Enabled] when you have installed a floppy disk drive and want to use it.
Onboard Serial Port 1/2
The items specify the base I/O port address and IRQ for the onboard Serial
Port 1 (COM 1)/Serial Port 2 (COM 2). Selecting Auto allows BIOS to auto-
matically determine the correct base I/O port address. Settings: [Disabled],
[3F8/IRQ4], [2F8/IRQ3], [3E8/IRQ4], [2E8/IRQ3], [Auto].
BIOS Setup
3-19
Advertisement
Table of Contents
