MSI E7210 MasterX-FA2R User Manual page 109

MSI Reminds You...
Do not interrupt the creation of a RAID 0 using the Migrate option.
If you do, there is no way to restart, and no way to recover the data
that was on the source drive.
5. When you are finished, press Done.
Initializing Disk Drives
If an installed disk does not appear in the disk selection list for creating a
new array or if it appears grayed out, you may have to initialize it before you
can use it as part of an array. Drives attached to the controller must be
initialized before they can be used in an array.
MSI Reminds You...
Initializing a disk overwrites the partition table on the disk and
makes any data on the disk inaccessible. If the drive is used in an
array, you may not be able to use the array again. Do not initialize
a disk that is part of a boot array. To determine which disks are
associated with a particular array, see Viewing Array Properties.
To initialize drives:
1. Turn on your computer and press Ctrl+A when prompted to access the
ARC utility.
2. From the ARC menu, select Array Configuration Utility (ACU).
3. Select Initialize Drives.
4. Use the up and down arrow keys to highlight the disk you wish to
initialize and press Insert.
5. Repeat Step 4 so that both drives to be initialized are selected.
6. Press Enter.
7. Read the warning message and ensure that you have selected the correct
disk drives to initialize. Type Y to continue.
Adaptec SATA RAID Utility for Intel ICH-HR
B-27