MacDon Harvest Header D65 Assembly Instructions Manual page 40

Lubrication Points (cont'd)
High Temperature Extreme
Pressure (EP2) Performance With
1% Max Molybdenum Disulphide
(NLGI Grade 2) Lithium Base
SICKLE HEAD
(SINGLE KNIFE - 1 PLC)
(DOUBLE KNIFE - 2 PLCS)
169603
PRE-DELIVERY INSPECTION
40
To prevent binding and/or excessive wear
caused by sickle pressing on guards, do not
over grease. If more than 6 to 8 pumps of the
grease gun are required to fill the cavity, replace
the seal in the sickle head.
Check for signs of excessive heating on
first few guards after greasing. If
required, relieve pressure by depressing
check-ball in grease fitting.
Revision B