Step 8. Attach Cam Arms - MacDon Harvest Header D65 Assembly Instructions Manual

For self-propelled windrowers

Hide thumbs Also See for Harvest Header D65:

Table of Contents

STEP 8.

ATTACH CAM ARMS

a. Manually rotate reel until the tine bars with the

disconnected cam links are accessible.

b. Remove shipping wire (if not already removed).

c. Remove bag of hardware from tine bar. It contains

hardware for cam links and endshields.

d. Rotate tine bar crank (A), and position link (B) until

attachment holes in bar crank and link are

approximately aligned.

169603

UNLOADING AND ASSEMBLY

e. Install bolt (C) in link, and position shim (D) on bolt

so that shim is between link and tine bar crank.

Bolts are pre-coated with Loctite

further locking method is required.

Re-align link and tine bar crank, and thread in the

bolt (C).

g. Repeat for remaining tine bars, and torque bolts to

120 ft·lbf (165 N·m).

NOTE

so no

Revision B

Table of Contents

D65