MacDon Harvest Header D65 Assembly Instructions Manual page 37

For self-propelled windrowers

Hide thumbs Also See for Harvest Header D65:

Table of Contents

6. Adjust gap:

i. From inside endsheet, loosen nut (F) on

pin (G).

ii. Close endshield, and adjust position to

achieve the gap 'X' between the front end

of shield and header frame in accordance

with chart on previous page.

7. Open endshield, and tighten nut (F).

8. Check for a snug fit between top of shield

and header frame, and full engagement of

endshield on pin (G). If necessary, loosen

bolts on catch (H), and adjust catch as

required to reposition shield.

9. Tighten bolts on catch (H).

10. Close endshield.

169603

PRE-DELIVERY INSPECTION

Revision B

Table of Contents

D65