Table of Contents
Advertisement
Operating instructions
4.2.2 Starting washing
4.2.3 Washing with automatic operation
WD-59CTS & WD-66CTS
When the machine's feed has started, it is indicated on the display that the
machine is ready to wash and that automatic operation has been preselected.
Press the start button (a) in the activity field on the touch panel to start the
conveyor and to start washing in automatic operation.
Button (b) must be pressed for manual operation. The start button (a) must also
be pressed if the machine has stopped.
Automatic and manual operation may be changed using any of the pushbuttons
(5) located both at the infeed and outfeed. Note that these may only be pressed
once to change operating mode.
66CT_29
•
Cutlery is normally lifted off the trays using a cutlery picker.
•
Trays of cutlery are transported on a tray conveyor. The trays are fed into
the machine automatically.
•
Cutlery must not be placed directly on the tray conveyor but on the trays.
•
The wash and rinse process will start automatically when trays and cutlery
are fed into the machine.
•
If no new trays are fed in, the machine will stop. After a while, the trays and
cutlery are automatically removed from the machine.
41
Rev. (202210)
Advertisement
Table of Contents
