Table of Contents
Advertisement
Installation instructions
•
•
The track on the dishwasher's rear panel at the joint between sections 1 and 2
A = Upper track
B = Lower track
C = Support plate
D = Nuts
•
WD-59CTS & WD-66CTS
Fit together all pipes for water, steam, condensation water and drain (pipe
for steam and condensation water on steam-heated machines only). The
pipes are split at the section join. The necessary parts for joining the pipes
together are fitted to the pipes at the joint. The pipes should be lubricated
with a sealant before joining.
Screw the upper and lower tracks of the conveyor belt together at the join
between the sections using the support plates and nuts supplied.
A
B
C
D
Fit the drainage plate. N.B.! The drainage plate must be turned so that it
slopes down towards the chemical wash tank.
16
35-1-00-010
35-1-00-011
Rev. (202210)
Advertisement
Table of Contents
