Table of Contents
Advertisement
Operating instructions
4.2 Washing
In this chapter, figures are given in brackets from the figure beneath chapter 4.1.1
Machine design.
4.2.1 Quick setting, washing pressure (option)
The dishwasher can also be equipped with the option to adjust the washing
pressure depending on whether you are washing normally or heavily soiled loads.
This is done using a lever (12) next to the infeed. When the lever is pushed
forward, the machine is set to wash heavily soiled items (high pressure). When
the lever is pulled back, the machine is set to wash normally soiled items (low
pressure). The position of the lever when washing normally or heavily soiled loads
is illustrated on a label on the machine next to the lever.
Make sure that the edge of the hole ends up in the lever rod indent when the lever
is reset. Otherwise, there is a risk of the lever moving out of position.
The position of the lever when washing normally and heavily soiled loads
WD-59CTS & WD-66CTS
C
B
A
Spoltryck V-H
A.
Lever to select normal or heavily soiled loads
B.
Lever pushed forward – heavily soiled loads
C.
Lever pulled back – normally soiled load
40
Rev. (202210)
Advertisement
Table of Contents
