Minelab F3 Service Manual page 65


Holding the detector and lower camlock assembly upside down (to prevent the
lower pressure block falling out) slide the camlock lower fully onto the lower
shaft with a twisting motion.
Protrusion on
Lower Shaft
Figure 71: Connecting the Camlock Lower to the Lower Shaft.

Turn the detector back over and ensure that the lower camlock assembly is
positioned on the lower shaft with the cam lever uppermost.

Push the pin into the camlock lower. Shown in Figure 72.
Figure 70: Inserting the Lower Shaft.
Figure 72: Inserting Pin Lower Camlock.
Page 65
F3 Service Manual