Speaker Pod - Minelab F3 Service Manual

F3 Service Manual

Reconnect the electronics pack to the coil cable as described in Section
To Connect an Electronics Pack.
The Skid Plate of the UXO coil is held in place by a small amount of silicone glue.
The UXO Skid Plate should only ever be removed from the coil when a new
3.9

Speaker Pod.

Figure 39 illustrates the major parts of the speaker pod.
2
Figure 38: Attaching UXO Coil.
Note
replacement is to be fitted.
3
5
1
4
Figure 39: Speaker Pod.
Page 42
4.3.b