Electronics Pack - Minelab F3 Service Manual

3.6

Electronics Pack

Figure 11 illustrates the major parts involved in removing and replacing the electronics
pack. The F3 and F3L use different electronics packs and should not be interchanged
unless the correct speaker pods (F3L requires the speaker pod with LED display) are
also fitted.
6 3004-0001
1 8007-0023
2 3004-0043
3
4 8009-0007
5
7 31-23020-980
8 30-4309-0039
9 0703-0095
10 & 11 4003-0084
12 4309-0071
13 0703-0097
6 3004-0036
Figure 11: Electronics Pack
Table 6: Electronics Pack.
Electronics Pack Kit F3
Upper Shaft
Wiring Loom
Coil Cable (Part Of 2021-0054 Coil F3)
Retainer Plug
Coil Connector (Part Of 2021-0054 Coil F3)
Screw M3x20 Skt Cap
O-Ring Bulkhead 50mm
Cover Bulkhead EP
Screw No 3x12 Posi
Grommet Bulkhead Split EP
Cover Ribbon Cable EP
F3L Electronics Pack Kit (only used on F3L)
Page 23
F3 Service Manual