Shafts - Minelab F3 Service Manual

3.13

Shafts.

The following procedures detail shaft disassembly/assembly and should be followed
in order until the component to be replaced is accessible. Figure 60 illustrates the
components of the shaft assembly.
Camlock Middle
Camlock Lower
a. To Disassemble Camlock Lower and Lower Shaft:
Camlock Kit
Lower
3004-0011
1 8007-0022
2 8008-0071
3 8008-0030
4 8008-0029
5 4308-0008
8007-0028
Camlock Upper
Middle Shaft
Lower Shaft
Figure 60: Shafts
Upper Shaft
Figure 61: Camlock Lower.
Table 8: Camlock Kit Lower
Camlock Kit Lower, contains items 1 to 5
Camlock Body Lower
Pressure Block Lower (include wear plate)
Wear Plate
Cam Lever Lower
Pin Lower Camlock
Lower Shaft (not part of camlock kit lower)
Page 59
F3 Service Manual
Upper Shaft
Camlock Middle
Lower Shaft