Stop Engine Before Carrying Out Inspection And Maintenance - Komatsu D155A-6 Operation & Maintenance Manual

PRECAUTIONS FOR MAINTENANCE

STOP ENGINE BEFORE CARRYING OUT INSPECTION AND MAINTENANCE

Lower the work equipment completely to the ground and stop
the engine before performing any inspection and maintenance.
Turn the starting switch to the ON position, operate the work
equipment control lever to the RAISE and LOWER position 2 or
3 times repeatedly to release the remaining pressure in the
hydraulic circuit, then set parking brake lever (1) and work
equipment lock lever (2) to the LOCK position (L).
Check that the battery relay is off and main power is not
conducted. (Wait for approx. one minute after turning off the
engine starting switch key and press the horn switch. If the horn
does not sound, it is not activated.)
Put blocks under the track to prevent the machine from moving.
2 - 30
SAFETY