Table of Contents
Advertisement
OPERATION
EXPLANATION OF COMPONENTS
CIGARETTE LIGHTER
This lighter (5) is used to light cigarettes.
When the cigarette lighter is pushed in, it will return to its original
position after a few seconds, so take it out to light your cigarette.
By removing the cigarette lighter, the socket is available as a
power source.
NOTICE
This cigarette lighter is 24V. Do not use it as the power supply for 12V
equipment. This will cause failure of the equipment.
The capacity of the cigarette lighter is 120W (24V x 5A).
ACCESSORY SOCKET
This (6) is used as the power source for a wireless or other 12V
equipment.
Accessory socket capacity: 60W (12V x 5A)
FRONT LAMP SWITCH
Use this switch (7) to light up the front lamps.
Positions (a) and (b): Lighted up
REMARK
If the switch is pressed at the moon mark end (a), the monitor panel
lighting becomes dimmer.
If the switch is pressed at the sun mark end (b), the monitor panel
lighting does not become dimmer.
REAR LAMP SWITCH
Use this switch (8) to light up the rear lamp.
ON position (a): Lighted up
OFF position (b): Out
3 - 54
Advertisement
Chapters
Table of Contents
