Table of Contents
Advertisement
OPERATION
ADJUSTING TILT AMOUNT
(Angledozer, tiltdozer)
When adjusting the amount of tilt, it is dangerous if the work equipment is moved by mistake. Set the work equipment in a safe
condition, then stop the engine and lock the work equipment securely with the work equipment lock lever.
ANGLEDOZER
NOTICE
The maximum amount of tilt is 400 mm (15.8 in). Be sure not to exceed 400
mm (15.8 in).
1. Raise the blade 300 - 400 mm above the ground, then put
blocks under the frame so that the blade does not come down.
2. Loosen the bolt (1) of the brace, insert a suitable bar into hole
(2) of the brace, and turn it.
REMARK
When turning the brace with bar, keep the blade above the ground.
Right tilt: Make right side shorter, left side longer
Left tilt: Make left side shorter, right side longer
WARNING
OPERATION
3 - 157
Advertisement
Chapters
Table of Contents
