Check After Stopping Engine; Check After Finishing Work; Locking - Komatsu D155A-6 Operation & Maintenance Manual

OPERATION

CHECK AFTER STOPPING ENGINE

1. Walk around the machine and check the work equipment, machine exterior, and undercarriage, also check for
any leakage of oil or coolant. If any problems are found, repair them.
2. Fill the fuel tank.
3. Check the engine compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard.
4. Remove any mud affixed to the undercarriage.

CHECK AFTER FINISHING WORK

Check the engine coolant temperature, engine oil pressure, and
fuel level on the machine monitor.

LOCKING

Places that can be locked with the starting switch key.
To prevent vandalism, there are locks in the following places.
Left and right engine side covers (1) (left side: 1 place; right
side: 1 place)
Battery inspection cover (2)
Cab door opener (3)
Lock-type caps (4) (if equipped)
Radiator cap
Hydraulic tank cap
Power train oil filler pipe cap
Padlock
Fuel tank cap (7)
REMARK
If the padlock is to be used, it is recommended to use the type that
has the cover to protect the key hole.
3 - 142
OPERATION