Table of Contents
Advertisement
OPERATION
OPERATIONS AND CHECKS BEFORE STARTING ENGINE
When starting the engine, check and make sure the work equipment
lock lever (4) and parking brake lever (1) are secured in the LOCK
position.
If the control levers are not locked and they are touched by accident
when starting the engine, the work equipment may move unexpectedly,
and this may lead to a serious injury or death.
When standing up from the operator's seat, always set the work
equipment lock lever (4) and parking brake lever (1) to the LOCK
position, regardless of whether the engine is running or stopped.
1. Check that parking brake lever (1) is locked.
If this lever is not in the LOCK position (L), the engine will not
start.
2. Check that joystick (2) is in the N (neutral) position.
3 - 114
WARNING
OPERATION
Advertisement
Chapters
Table of Contents
