Table of Contents
Advertisement
OPERATION
MOVING MACHINE
Before moving the machine, check that the area around the machine is
safe, and always sound the horn before moving.
Do not allow anyone to enter the area around the machine.
The rear of the machine is a blind spot, so be extremely careful when
traveling in reverse.
When moving the machine down a slope, always keep brake pedal (8)
depressed, even after releasing parking brake lever (1).
When moving the machine up a steep slope, turn fuel control dial (5) to
high idling (MAX) position and run the engine at full speed, and keep
brake pedal (8) and decelerator pedal (6) depressed. Then operate
steering, directional, and gearshift lever (4) from the N (neutral) position
to the direction of travel and slowly release brake pedal (8). When the
travel speed rises, slowly release decelerator pedal (6).
1. Operate parking brake lever (1) to the FREE (F) position.
2. Operate work equipment lock lever (2) to the FREE (F)
position.
WARNING
OPERATION
3 - 125
Advertisement
Chapters
Table of Contents
