OPERATION
EXPLANATION OF COMPONENTS
FUSE BOX
NOTICE
Before replacing a fuse, be sure to turn starting switch to the OFF position.
Fuses protect the electrical equipment and wiring from burning out.
If a fuse becomes corroded, or white powder can be seen, or a fuse is loose in the holder, replace the fuse.
Replace a fuse with another of the same capacity.
If the battery cover on the left side of the machine is opened, the fuse box and the circuit breaker can be seen inside.
(1) Fuse box FS2
(2) Fuse box FS1
(3) Circuit breaker
(4) Circuit breaker for main power supply
Open the battery cover inspection window at the rear left of the
machine. The circuit breaker for the main power supply is inside
Cab (machines equipped with cab)
Fuse box is installed at the bottom of the overhead panel.
3 - 62