Komatsu D155A-6 Operation & Maintenance Manual page 166

OPERATION OPERATION
REMARK
The engine cannot be started if joystick (steering, directional, and
gearshift lever) (2) is not in the N position.
If joystick (steering, directional, and gearshift lever) (2) is in F or R,
the letter P on display panel A will flash.
3. Lower the blade to the ground. Is blade control lever (3) at
HOLD position (b)?
4. Check that the ripper is lowered to the ground.
5. Check that the work equipment lock lever (4) is LOCK position
(L).
OPERATION OPERATION
3 - 115