Safety; General Safety; Messages And Symbols - Thermo Scientific Vitrobot Mk IV User Manual

Chapter | Safety
2

Safety

2.1 General Safety

•
One should abide by the rules of the laboratory and local authorities to secure safe
working conditions.
•
The Vitrobot has been designed for use in a fume hood exclusively and is to be operated
by trained personnel only.
•
Working with explosive materials like ethane and propane requires working in a spark free
fume hood. Working with these materials is at own risk!
•
Only use the Humidifier with demineralized, distilled water. Any other liquids may cause
damage to the Vitrobot.
•
To prevent any formation of bacteria in the pre-heated water of the humidifier, it is
advisable to dispose the water in the humidifier at the end of each working day!
•
Working with Biohazard materials is at the user's own risk and responsibility!
•
Do not perform internal trouble shooting unless you are a trained service person and
unless another person, capable of rendering first aid or resuscitatio n, is in the immediate
vicinity.
•
Be aware of the location of the nearest phone.
•
Be aware of the emergency services number.
•
Always ensure a safe environment when performing service or maintenance.
•
Make sure your hands are dry and that you are standing on a dry, insulated surface,
capable of withstanding the accessed voltages.
•
Make sure the Vitrobot has been leveled to avoid the chance of toppling over.
•
FEI cannot be held responsible for the consequences of improper handling!

2.2 Messages and Symbols

Messages
The following messages are used throughout the manuals to highlight information.
Note Text
A Note message indicates the information in it requires special attention.
Confidential, limited rights
PN 103261 | Revision D | 23-Oct-2019
User Manual
Page 9