Table of Contents
Advertisement
Safety Recommendations
4.
Safety Recommendations
These notes are intended to draw your attention to risks
which only YOU can recognize and avoid or overcome. They
are intended to enhance your own safety consciousness.
!
This instruction manual must be carefully studied! It
contains important information on the connection
to the local mains supply, correct unit usage and
safe handling.
!
Ensure that this manual is always at hand for every
unit operator.
!
Check for transportation damage during unpack-
ing. Do not try to start up a damaged unit.
!
Repairs, alterations or modifications must only be
carried out by specialist personnel. Considerable
damage can be caused by improper repairs. The
Thermo Fisher Scientific) service department is at
your disposal for repair work.
!
All connections of the system are suitable for
Thermo
because of their specific current and voltage
conditions.
!
The instrument must be lifted and transported by
two people, the instrument weight is 56 kg.
!
Not to be placed on a base of inflammable material.
!
Only use this unit solely for the intended applica-
tion.
!
Do not operate the unit with wet or oily hands.
!
Many units parts can become hot as a result of nor-
mal unit functioning - - there is a high risk of burns!
Please ensure that adequate contact protection is
provided.
!
Do not move the unit from the position where it was
set up during operation or when it is still hot.
!
Complete separation from the mains is required
when:
- -
all dangers caused by this device are to
be avoided,
- -
repairs or maintenance work is about to be
carried out.
!
Dependent on the temperature and the substance
to be measured toxic gases can be set free. (Atend
the safety data sheets!)
!
Start the measuring sensor only at operating tem-
perature!
Fisher
Scientific
5
components
only
Advertisement
Table of Contents
