Multi Sv - Autonics TM Series User Manual

6 Parameter Settings and Functions
6.6.2.2 Alarm Output Upon STOP



6.6.3

Multi SV



6.6.3.1 Number of Multi SVs
You can set the number of Multi SVs. Select the number of Multi SVs from the controlled
subject.
Number of SVs
6.6.3.2 Multi SV No. Change
You can select the SV to desired control.
86
Enable or disable alarm output upon a stop.
CONTINUE: Alarm output operates normally.
OFF Alarm output ceases along with a stop under all conditions.
(However, reverting to Run mode after a stop in alarm latch or alarm latch and
standby sequence restores the alarm output to the previous state.)
Group
Control Setting Group
Multi SV function allows users to set multiple SVs and save each setting in SV0 ~
SV3. User can change Multi SV number or select desired SV using external DI
(Digital Input, DI-1, DI-2) terminal.
This feature supports up to four SVs which can be independently configurable.
1 EA SV-0
2 EA SV-0, SV-1
4 EA SV-0, SV-1, SV-2, SV-3,
The SV No. selection range varies according to the number of multi
SVs.
Parameter
CONTINUE,
Stop Alarm Out
SV Assignment
© Copyright Reserved Autonics Co., Ltd.
Factory
Range
Default
CONTINUE :
OFF
Unit
-