Safety Precautions - Autonics TM Series User Manual

Safety Precautions

Safety Precautions










vi
Please follow safety precautions to ensure the safe and proper use of the product and
prevent accidents, as well as minimizing possible hazards.
Safety precautions are categorized as Warnings and Cautions, as defined below:
Warning
Caution
In case of using this unit with machinery (Ex: nuclear power control, medical
equipment, ship, vehicle, train, airplane, combustion apparatus, safety device,
crime/disaster prevention equipment, etc) which may cause damages to human life or
property, it is required to install fail-safe device.
It may cause a fire, human injury or damage to property.
Always install the unit on a panel.
It may cause an electric shock if not followed.
Never wire, repair, or inspect the unit while electricity is flowing through it.
It may cause an electric shock if not followed.
Check the input power specifications and terminal polarity before connecting the
wires.
It may cause a fire if not followed.
Only Autonics technicians are authorized to service or modify the product.
It may cause an electric shock or fire if not followed.
Do not use outdoors.
It may shorten the life of the product and/or cause an electric shock if not followed.
Always use AWG 20 (0.5 mm
It may pose a fire risk if not followed.
Always use within the range of rated specifications and performance.
Cases that may cause serious injury or fatal accident if
instructions are not followed.
Cases that may cause minor injury or product damage if
instructions are not followed.
) or higher when wiring to the relay's output terminals.
2
© Copyright Reserved Autonics Co., Ltd.