Input Type Settings; Temperature Unit Settings For Input Temperature Sensor - Autonics TM Series User Manual

6 Parameter Settings and Functions
6.1.2

Input Type Settings



6.1.3 Temperature Unit Settings for Input Temperature
Sensor
When selecting the temperature sensor input options, you can set the desired units of
operation temperature/display temperature.
Initial Setting Group
46
This product supports multiple input types, making it possible for the user to choose
from thermocouples, resistors, and analog voltage/current.
Different sensors can be designated to each channel.
Ex.) CH1 input type = KCA.H, CH2 input type = JIC.H
Group
Initial Setting Group


Group
When modifying the temperature units, setting values of the related
parameters remain the same as the existing values, and SV, Multi SV
No., SV-0 to SV-3, SV high-limit/low-limit, and input bias will be
initialized.
Parameter Setting range
Input Type See 6-1-1
When input types are modified, the high-limit and low-limit
setting values of SV are automatically changed to max/min
values of operational temperature range of the modified input
type. You must reset these values. (SV, Multi SV No, SV-0 to
SV-3 and input bias are initialized.) However, measurement
units remain the same.
If the measured value is out of the input range, the loader
program displays HHHH (high-limit), LLLL (low-limit) and
displays OPEN when the sensor is not connected.
Parameter Range
℃, ℉
Unit
© Copyright Reserved Autonics Co., Ltd.
Factory default Unit
K(CA).H
Factory Default Unit
℃
-
-