Table of Contents
Advertisement
Loading/conveying material
- Button (59) has to be switched off.
- Use switch (36)/(37) to open the hopper.
Instruct the truck driver to dump the material.
- Set the switches for the auger (53)/(54) and the conveyor (47)/(48) to "Auto".
- Activate function (67) to fill the vehicle for the paving process.
- Switch the conveyors on. The conveyor limit switches (A) / (B) must switch off when
the material has approximately reached the area beneath the auger crossbeam.
- Check that the material is transferred properly.
Manually switch on or off the conveyor if the material is not conveyed properly until
a sufficient amount of material lies in front of the screed.
D 43 23
Advertisement
Table of Contents
