Table of Contents
Advertisement
Auger height adjustment ratchet (o)
For mechanical adjustment of the auger
height
- Set the ratchet direction lever (1) to
the clockwise or anti-clockwise direc-
tion. Turning anti-clockwise lowers the
auger, turning clockwise lifts the au-
ger.
- Actuate the ratchet lever (2)
- Set the desired height by alternately
actuating the left and right ratchets.
The current height can be read on both
A
auger height indicators.
Observe the notes on adjusting the auger height in the chapter "Set-up and modifica-
A
tion"!
Auger height indicators
A scale (1), on which the currently set
auger height can be read off, is located
on the left and right sides of the ladder.
Display in cm
A
- Loosen the clamping bolt (2) to
change the position of the indicator.
m
When setting the auger height, adjust-
ment must be carried out evenly on both
sides to prevent the auger from jam-
ming!
1
2
2
1
D 31 23
Advertisement
Table of Contents
