Fayat Group DYNAPAC SD2500W Operation & Maintenance Manual page 213

Paver finisher
Hide thumbs Also See for DYNAPAC SD2500W:
Table of Contents

Advertisement

Command
-
Indicator lamp automatic particulate filter re-
generation - deactivated
Particulate filter regeneration is deactivated.
-
Automatic regeneration should only be deacti-
vated if the operating status of the paver finish-
er does not permit any automatic function.
see "Particulate filter regeneration" menu
A
-
Warning - high exhaust gas temperature!
(HEST)
The indicator lamp indicates a high exhaust gas
temperature!
It is normal for the indicator lamp to go on
A
and off during operation while the exhaust
gas system is being cleaned by the engine.
f
Keep the outlet of the exhaust pipe out of the
reach of people and of objects that can burn,
melt or explode!
f
There may not be any people or objects with-
in a radius of 0.6 m of the exhaust outlet!
f
There may not be any objects or substances
that can burn, melt or explode within a radius
of 1.5 m. (petrol, wood, paper, plastic, tex-
tiles, pressurised cylinders, hydraulic lines).
In an emergency, turn the engine off so that
A
no more exhaust gas is emitted!
-
Indicator lamp AdBlue
®
The level of AdBlue
Level 10% - display flashes
Level 5% - display stays on permanently
Level 0% - drive engine is throttled to
emergency mode
-
Indicator lamp platform lock.
The control platform lock is set.
®
/ DEF
/ DEF is insufficient.
Symbol in the display
D 22 43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynapac sd2500ws897898

Table of Contents