Mppp Authentication/Receive Username; Mppp Authentication/Receive Password; Mppp Authentication/Transmit Auth Type; Mppp Authentication/Transmit Auth Method - ADTRAN ISU 512e Manual

MPPP Authentication/Receive Username

This is the username that is used to match the peer's user-
name. If the name does not match, the call is terminated.

MPPP Authentication/Receive Password

This is the password or secret that is used to authenticate the
peer.

MPPP Authentication/Transmit Auth Type

This parameter specifies how the ISU 512e is to be authenticat-
ed by the peer. The possible values are:
N
ONE
PPP

MPPP Authentication/Transmit Auth Method

The ISU 512e can be authenticated using the same three meth-
ods described above for R

MPPP Authentication/Transmit Username

This is the username that is used when being authenticated by
the peer.

MPPP Authentication/Transmit Password

This is the password or secret that is used when being authen-
ticated by the peer.

Protocol/Transparent

The unit can also be configured for 56K or 64K Clear Channel mode.
provides the entire bearer channel to the DTE without
T
RANSPARENT
regard to data format or protocol.
61203086L1-1
Chapter 6. Configuration Menu
The ISU 512e will not allow the peer to
authenticate it.
The peer is authenticated according to the
Transmit Auth Method.
A M
ECEIVE UTH
ISU 512e User Manual
.
ETHOD
6-27