Management/Maint Port; Maint Port/Password Protect; Maint Port/Password; Maint Port/Baud Rate - ADTRAN ISU 512e Manual

Management/Maint Port

The ISU 512e has an EIA232 MAINT PORT connector on the back of
the unit. The setup for that port is under this menu.

Maint Port/Password Protect

When set to O , the maintenance port is not password protected.
FF
When O (def), the ISU 512e will prompt for a password upon startup.
N

Maint Port/Password

This is the text string that is used for comparison when password pro-
tecting the maintenance port. By default, no password is entered.
The following M
front panel by selecting 3=C

Maint Port/Baud Rate

This is the asynchronous rate that the maintenance port will run. The
possible values are 300, 1200, 2400, 4800, 9600 (def), 19200, 38400,
57600, 115200.

Maint Port/Data Bits

This is the number of data bits per byte that the maintenance port will
use. The possible values are 7 or 8 (def) bits.

Maint Port/Parity

This is the asynchronous parity that the maintenance port will run.
The possible values are N

Maint Port/Stop Bits

This is the stop bit used for the maintenance port. The possible values
are (def) or 2.
1
61203086L1-1
Chapter 6. Configuration Menu
P options can be accessed from the
AINT ORT
, then 5=M
ONFIG
(def), O , or E
ONE DD VEN
ISU 512e User Manual
S .
AINT ETUP
.
6-31