Table of Contents
Advertisement
Appendix B. Status Buffer Messages
AutoSwitch LUCENT
ExpertISDN has determined that the switch protocol is LUCENT 5E
custom.
AutoSwitch NI-1
ExpertISDN has determined that the switch protocol is National ISDN
1.
Bad call type
ISU 512e placed a call with an improper call type.
Bad DTE mode
The DTE bit rate does not match a valid bit rate for the protocol select-
ed.
Bad DTE bps
Bonding negotiation determined that the chosen DTE bit rate is in-
valid.
BAD_INFO_ELEM
Call control error.
Bad phone number
ISU 512e attempted to call an invalid phone number.
BEAR_CAP_NOT_AVA
The bearer channel requested by the user is not available.
B-2
ISU 512e User Manual
61203086L1-1
Advertisement
Table of Contents
