Expertisdn/Line; Expertisdn/Start/Stop; Dial Line/Spid Download; Dial Line/Call Type - ADTRAN ISU 512e Manual

.
Since the unit determines not only the appropriate SPIDs,
but also the switch protocol, ExpertISDN should be used
prior to placing active calls and transferring data.

ExpertISDN/Line

This field identifies the specific line for which ExpertISDN is
to be run. DSL1-DSL4 are used when ExpertISDN is to be run
on one line at a time. The A
pertISDN on all lines at once. ExpertISDN will skip any
lines that are not active when the process is started.
Using the E
minutes to complete.

ExpertISDN/Start/Stop

This field activates the ExpertISDN process if it is not active,
or stops ExpertISDN if it is currently in progress.

Dial Line/SPID Download

The SPID D feature allows the automatic detection of LDNs
OWNLOAD
and SPIDs on switches running the NI-1 protocol that are so config-
ured. The default for this field is E
not have this feature or the switch protocol may not be NI-1; therefore,
this feature can be D
ISABLED

Dial Line/Call Type

The C can be configured four different ways, depending on
ALL TYPE
the type of service used.

Call Type/Speech

S directs the call control software to request a Mu-law/
PEECH
A-law speech circuit as the bearer capability for outgoing calls.
The S option is used with an ISDN line configured for
PEECH
voice service. In some areas voice service costs less than data
61203086L1-1
Chapter 6. Configuration Menu
selection is used to run Ex-
LL
selection may take several
ISDN A
XPERT LL
. Some NI-1 switches may
NABLED
.
ISU 512e User Manual 6-5