Connecting Power; Bios Setup And System Assignments - Advantech UNO-2000 Series User Manual

Note:

3.4 Connecting Power

Connect the UNO-2182 to a 9 ~ 36 VDC power source. The power source
can either be from a power adapter or an in-house power source.

3.5 BIOS Setup and System Assignments

UNO-2182 adopts Advantech's SOM-5782 CPU module. Further infor-
mation about the SOM-5782 CPU module, can be found in SOM-5782
user's manual. You can find this manual on the UNO-2182's driver and
utility CD-ROM.
Please note that you can try to "LOAD BIOS DEFAULTS" from the
BIOS Setup manual if the UNO-2182 does not work properly.
UNO-2182 User Manual
CN8 is Primary's master
CN7 is Primary
Please do not use CN8 and CN7 at same time.
If your OS is build in CF card and program,applica-
tion and data are save in HDD, please install CF in
CN8 and connect SATA HDD in CN40 (SATA sig-
nal) and CN41 (SATA power), please also refer
CN40 and CN41 pin assignment in A.10
Also you could apply external SATA connector to
link with your storage device for data storage, this
connector only provides signal, but not power. As
for external SATA connector pin definitions, please
refer to A.11.
20