Table of Contents
Advertisement
3.6 Installing PCI-104 Modules
If you need install PCI-104 module on UNO-2182, please refer below
procedure.
1.
Make sure power core is not connected with UNO-2182.
2.
Unscrew the four screws from the rear panel.
3.
Slide off down cover of UNO-2182.
4.
Unscrew four screws from PCB, please refer below picture.
5.
Screw up 2 post and PCI-104 bracket in accessory, please refer
below picture.
21
Chapter 3
Advertisement
Table of Contents
