Table of Contents
Advertisement
2.8 PCMCIA: PC Card Slot
The UNO-2182 provides one PC Card slot that supports CardBus (Card-
32) cards and 16-bit (PCMCIA 2.1/JEIDA 4.2) card standards. It supports
+3.3 V, +5 V. The PC Card is 85.6 mm long by 54 mm wide (3.37" x
2.126"), use a 68-pin connector and a removable module standardized by
PCMCIA that is known as "PCMCIA card."
PS: PCMCIA interrupt assignment is IRQ 7.
2.9 VGA Display Connector
UNO-2182 provides DVI-I interface, you could link you DVI or VGA
monitor through DVI-I to DVI and VGA cable. (Advantech P/N :
1700004713), As for detail DVI-I pin assigmnet, please refer A.10.
The UNO-2182 provides a VGA controller (Intel 945GM GMCH for a
high resolution VGA interface. It supports CRT Mode: 1600 x 1200 @
32bpp @ 85Hz, and up to 32 MB shared memory.
2.10 Battery Backup SRAM
UNO-2182 provides 512 KB of battery backed SRAM. This ensures that
you have a safe place to store critical data. You can now write software
applications without being concerned that system crashes will erase criti-
cal data from the memory.
There is a BTRY LED in the front panel of the UNO-2182, please replace
the lithium battery with a new one if the BTRY LED is activated.
2.10.1 Lithium Battery Specification
• Type: BR2032 (Using CR2032 is NOT recommended)
• Output voltage: 3 V
• Location: the backside of UNO-2182 board.
(BH2 is for SRAM, BH1 is for real time clock)
UNO-2182 User Manual
DC
14
Advertisement
Table of Contents
