Chapter 3 Initial Setup; Chassis Grounding; Inserting A Compactflash Card - Advantech UNO-2000 Series User Manual

Chapter 3 Initial Setup

3.1 Chassis Grounding

The aluminum made UNO-2182 provides good EMI protection and a sta-
ble grounding base. There is an easy-to-connect chassis grounding point
for you to use.
Please connect chassis ground of UNO-2182 with "EARTH" as ground.
Note:

3.2 Inserting a CompactFlash Card

The procedure for installing a CompactFlash card into the UNO-2182 is
detailed below, please follow these steps carefully.
1. Remove the power cord.
2. Unscrew the four screws from the rear panel.
3. Remove the storage panel.
4. Plug a CompactFlash card with your OS and application program
into a CompactFlash card slot on board. (CN8)
5. Screw back the rear panel with four screws
UNO-2182 User Manual
Figure 3.1: Chassis Grounding Connection
UNO-2182 is design as system power ground
and chassis ground is separated.
18