Table of Contents
Advertisement
Chapter 4: BIOS Setup
Installing the Software Package
Refer to the steps below to install the specified software package. The
example shown here is connecting to a PC using port 1.
Step1. dhclient fm1-mac6
Step2. apt update
Step3. apt install specified_package_name
ip_forward Testing
To do the "ip_forward" testing, the command should be as follows:
"/etc/sysctl.conf" to set "net.ipv4.ip_forward=1".
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
Turning Off the DTA1376/DTA1376A
Before powering off the DTA1376/DTA1376A, it is suggested to command
"halt" first.
30
DTA1376 Series User Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the DTA1376 Series and is the answer not in the manual?
Questions and answers