Table of Contents
Advertisement
Revision History
Version
V1.0.0
Initial release.
1. Changed the range of Decode Session Timeout to 100ms -
3,600,000ms in Chapter 2.
2. Added the Host Acknowledgment and Keep/Delete Stored
Data after Batch Transmission features in Chapter 4.
3. Added the EAN-13 Beginning with 290 Add-On Code
Required, EAN-13 Beginning with 378/379 Add-On Code
Required, EAN-13 Beginning with 414/419 Add-On Code
Required, EAN-13 Beginning with 434/439 Add-On Code
V1.0.1
Required, EAN-13 Beginning with 977 Add-On Code
Required, EAN-13 Beginning with 978 Add-On Code
Required, EAN-13 Beginning with 979 Add-On Code
Required, Code 32 (Italian Pharma Code), Code 32 Prefix,
Transmit Code 32 Check Digit and Transmit Code 32
Start/Stop Character features in Chapter 5.
Note: Firmware version V1.3.3 or later is required for the new
features above.
1. Maximum barcode length supported by the scanner is 3K
bytes.
2. Added the BA command (Replace a string with another) in
V1.0.2
Chapter 8.
Note: Firmware version V1.3.6 or later is required for the new
features above.
Added the Specify Decoding Area (Top, Bottom, Left, Right)
V1.0.3
feature in Chapter 2.
Updated the "Dimensions of Scanner (unit: mm)" section in
V1.0.4
Chapter 1.
Description
Date
September 1, 2016
January 4, 2017
March 23, 2017
April 27, 2017
October 31, 2017
Hide quick links:
Advertisement
Table of Contents
