Split / Multi Window Monitoring - Mitsubishi Electric FX Series Training Manual

Monitoring the Project
4.4.1

Split / Multi Window Monitoring

To monitor both of the project' POU's simultaneously, open both POU bodies and select Tile
Horizontally from the Window menu.
NOTE
Important: It should be noted that when initially entering monitor mode with
screen in focus will be monitored. This is to avoid unneeded communication traffic occurring
from other screens that have been opened but are not necessarily in the focus (i.e. opened
but behind).
To begin monitoring the content of additional windows, click inside that window and select Start
Monitoring from the Online Menu:
NOTE Due to the serial communications handshake, be prepared to wait a few seconds for the
monitor information to be registered between GX IEC Developer and the PLC.
4 - 44
Building a Project
, only the
MITSUBISHI ELECTRIC