Configuring The Fx 3U -Enet By Fx Configurator-En - Mitsubishi Electric FX Series Training Manual

Configuring the FX -ENET by FX Configurator-EN
3U
Open the Operational Settings and take over the settings shown below in red frames. The
IP address 192.168.1.101 of the FX
work if your network IP is 192.168.1.1.
Next, open the Open Settings and take over the following settings.
18 - 4
-ENET corresponds to the requirements of your net-
3U
Ethernet Communications
MITSUBISHI ELECTRIC