Network Modules For Cc-Link - Mitsubishi Electric FX Series Training Manual

Extending for Special Functions
2.9.6

Network Modules for CC-Link

CC-Link Master Module FX
The CC-Link network enables the controlling and monitoring of decentralized I/O modules at the
machine.
The CC-Link master module FX
series PLC as the master station of the CC-Link system.
CC-Link Communication Modules FX
The communication modules FX
CC-Link network with a superior PLC system as master CPU. This gives him access to the net-
work of all MELSEC PLC systems and frequency inverters and to additional products from other
suppliers.
Overview of Network Modules for CC-Link
Module type
Special function modules
b
The special function module can be used with a base unit or expansion unit of this series.
The special function module cannot be used with this series.
2 - 28
-16CCL-M
2N
-16CCL-M is a special extension block which assigns an FX
2N
RUN
ERR .
MST
TES T 1
TES T 2
L RUN
L ERR .
CC -
LIN K
FX -16 CC L-M
2n
SW
M/S
PRM
TIM E
LINE
SD
RD
2N
-32CCL and FX
2N
FX -3 2C CL
2N
LRU N • LER R • RD • SD
Designation
FX -16CCL-M
2N
FX -32CCL
2N
FX -64CCL
3U
The setting of all modules within the network
is handled directly via the master module.
Up to 15 remote stations (7 remote I/O sta-
tions and up to 8 remote device stations) can
be connected to the master station. Two mas-
ter modules can be connected to one base
unit.
The maximum communications distance is
1200 m without repeater.
-32CCL and FX -64CCL
3U
-64CCL enable the user to connect to the
3U
Thus the network is expandable via the digital
inputs/outputs of the FX modules to a maxi-
mum of 256 I/Os.
Description FX
Master for CC-Link
Remote device station
for CC-Link
The Hardware
FX FX
2N
FX FX
1S 1N 3G
FX FX
2NC 3UC
b b b b
b b b b
b b
MITSUBISHI ELECTRIC
3U