Mitsubishi Electric FX Series Training Manual page 98

Application Program
Entering a Function Block command into the Ladder program
Before continuing, it is recommended for the remainder of this course, that the Automatic
input/output variables facility be "Disabled" by de-selecting this option. This facility is found
under the Extras menu using the Options selection and selecting Editing , as shown below:
The MELSEC Function Block command, 'PLS_M' will be added to the program as the output
function.
Click on the Function / Function block
tor type click Functions and type "PLS_M" into the Operators prompt box thus:
4 - 18
selection button on the tool bar. On the Opera-
MITSUBISHI ELECTRIC
Building a Project